Sealed thin-plate Lead acid batteries
CYCLON type – Lifetime 10 years at 25°C
- Voltage 2, 4, 6 and 12V
- C20 capacity : 2.5 to 25 Ah
- Excellent behaviour at low temperatures, down to -40°C
- Pure lead thin-plate electrodes
CYCLON batteries 2.5 – 8Ah |
NEW - Sealed AGM Lead acid batteries
FG series – Lifetime 5-10 years at 25°C
- Voltage 6 and 12V
- C20 capacity : 0.8 to 200 Ah
FIAMM FG batteries 0.8 to 200Ah |
Sealed GEL Lead acid batteries 5-180Ah
A400 type – Lifetime 7-10 years at 25°C
- Voltage 6 and 12V
- C20 capacity : 5.5 à 180Ah
- Gelified electrolyte (no maintainance)
- High reliablity
A400 batteries |
Stationnary Lead acid solar batteries 65-230Ah
“STECO solar” type – Lifetime 7-10 years at 25°C
- Voltage 12V
- C20 capacity : 65 to 230Ah
- Lquide electrolyte (low maintainance)
- High reliablity
- Specially developped for renewable energies
STECO solar batteries |
Charge controllers & others
Overcharge controllers < 1A
SHx series – circuit board in the output cables of TD-series modules
- Nominal voltage : 4, 6 and 12V
- Shunt controllers, with a Zener diode
Overcharge controllers SHx |
SH4 – SH6 – SH12 – SH12 R
Overcharge controllers 6 to 8A
Mini IV – series- simple circuit board or in an IP65 cabinet
- Nominal voltage : 6, 12 and 24V
- Series regulation, CMOS technology
- Charge protection only
Charge controllers Mini IV A & B |
Mini IVA 6A 6V – Mini IVA 6A 12V – Mini IVA 6A 24V – Mini IVB 8A 12V – Mini IVB 24V
Charge-discharge controllers 6 to 12A
SOLSUM series in IP 22 cabinets
- Nominal voltage 12/24V
Charge-discharge controllers SOLSUM |
SOLSUM 6.6 – SOLSUM 8.8 – SOLSUM 10.10 |
Charge-discharge controllers SOLSUM F |
New generation SOLSUM 6.6 F – SOLSUM 8.8 F – SOLSUM 10.10 F |
Charge-discharge controllers 10 to 20A
Type ENER in IP63 & 65 cabinets
- Nominal voltage 12/24V
Charge-discharge controller ENER 12 |
Charge-discharge controller ENER 20 |
ENER 10 – ENER 12 – ENER 20
MPPT controller & converter 12 -> 6V
SOLEMS-made circuit board to charge a 6V battery with a 12V-module with an MPPT, charge and discharge controls
- Module nominal voltage : 12V
- Battery nominal voltage : 6V
- Max charge current : 2A (25W module)
Controller-converter MPPT 12->6V |
DC-DC converters
To adapt DC voltage of the solar system to DC voltage of the appliances. Contact usTo adapt DC voltage of the solar system to DC voltage of the appliances.
DC-AC converters (inverters)
To tuen a DC power output into an AC sinwave power to feed AC-220V or 115V appliances.